Sub20 (ADAM Audio)

aktivní studiový subwoofer, rozsah 25 hz - 150 kHz, osazení 2x 10", výkon: 2x 200 W

Kód produktu: 344304
Měrná jednotka: ks
Vaše cena 28 990 Kč (1 115 €) cena bez DPH 23 958,68 Kč (921,49 €)
Není skladem
Praha - Letňany
Není skladem
Jeden ks
Hradec Králové
Není skladem
Není skladem
Zvolte počet kusů:
- +
  Pro více nákupních seznamů se přihlášte >>
aktivní, 2x10" studiový subwoofer,HPF 85 Hz pro monitory, LPF 50 - 150 Hz, přepínač polarity

od 1.1.2017 je na tento studiový subwoofer Adam Audio poskytována základní záruka 2 roky, pro 5 let rozšířené záruky je NUTNÉ zaregistrovat seriová čísla svých monitorů na Bez tohoto kroku nebude rozšířená záruka výrobcem uznána.

ADAM subwoofers
Our subwoofers are dedicated to ADAM Audio’s primary goal: the best possible authenticity in the reproduction of music. For our subwoofers, this means combining power and precision while simultaneously avoiding “impressive” bass volume at the cost of accuracy. Their task is it to complement the highly acclaimed lucidity and transparency of the ADAM monitors in the lower and lowest frequencies.

Room size/Subwoofer recommendations
The overview which can be found under FAQ allows finding the right subwoofer for different room sizes. It should be noted that these are recommendations only. Depending on your SPL demand or the kind of music you prefer you may go up or down the ladder of course.

Connectors and controls
All subwoofers up to the Sub2100 feature both balanced (XLR) and unbalanced (RCA) in and output connectors, and numerous controls to adapt the subwoofer to different room acoustics and specific requirements: All units have a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150 Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a ‘signal-on/continuous’ switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.

The Sub20 is a very powerful subwoofer designed for medium sized or larger control rooms in which powerful and yet accurate extra deep bass monitoring is required. The Sub20 is equipped with 2 long throw 10” drivers which are meant to reproduce LFE or other low frequency signals down to 25 Hz. The amplifier section has 2 units, each capable of delivering 200 W continuous peak power to their corresponding drive units. Both power supply and amplifier section use PWM technology, meaning very high efficiency (?90%) and cool operation in even the most critical phases of operation.

The power of 2 subwoofers and Force Compensation
he Sub20 has two drivers, which are mounted in chambers at opposite sides of the cabinet. Due to this alignment, the forces applied to the cabinet oppose each other and consequently compensate themselves, so that the cabinet stays much quieter than with conventional arrays. Distortion is drastically reduced in this manner, resulting in improved signal clarity, especially at higher levels. Furthermore, there are 2 down firing bass reflex tubes that, because of their size and construction, successfully avoid ventilation noise. An additional output allows daisy-chaining as many Sub20s as desired.
koncepce: 2x 10''
dělící kmitočty: 50-150 Hz
frekvenční rozsah: 25 - 150 Hz
výkon RMS: 500 W
Max. SPL: 118 dB
LF - průměr kmitací cívky: 2 "
LF - materiál membrány: impregnovaný papír
hmotnost: 38 kg
rozsah -3 dB: 25-150 Hz
LF - rozměr: 2×10 "
rozměry: 300×560×810 mm
hmotnost: 38 kg